Check power
Make sure the dock is plugged in, the socket works and the dock's light is on.
Clean the charging contacts
Wipe the metal contacts on the robot and dock with a dry cloth or a little isopropyl alcohol. Dust and grime are the most common cause.
Check dock placement
Level hard floor, against a wall, about 50 cm clear in front. Don't move it after mapping.
Clean the dock sensor window
The infrared beacon helps the robot find home.
Turn the power switch on
Some robots have a main switch underneath that must be on to charge.
Restart and update
Power-cycle the robot and dock, then update firmware.
Re-seat the battery
If your manual allows, remove and refit it.
Replace the battery
After 2–4 years, a worn battery is common. A genuine replacement is usually best.
Safety: use the maker's battery or a reputable equivalent. Stop using any battery that is swollen, hot or damaged.
See how long robot vacuums last to decide between a new battery and a new robot.
Prices change often on Amazon. Check the live price before you buy.
Frequently asked questions
Why won't my robot vacuum go back to its dock?
Usually the dock was moved after mapping, something blocks the approach, or the dock's infrared window is dirty. Put the dock back where it was mapped with clear space in front.
How do I know if the battery is dead?
If the robot charges to full but runs only a short time, or won't charge despite clean contacts and a working dock, the battery is likely worn.
